OPTEVA™ TDA® additives are aqueous compositions of grinding aids with set-accelerating, water-reducing, and strength-enhancing compounds, all carefully controlled and accurately blended for constant quality and optimum performance.
Product specifications for the most widely used OPTEVA™ TDA® formulations are as follows:
| Products | S.G. | pH |
| OPTEVA™ TDA® 730 | 1.21 (±0.01) | 8 - 10 |
| OPTEVA™ TDA® 735 | 1.20 (±0.01) | 8 - 10 |
| OPTEVA™ TDA® 770 | 1.17 (±0.01) | 8 - 10 |
Product specifications particular to other OPTEVA™ TDA® formulations are available through GCP Field Engineers.
Laboratory mill evaluations of clinker and other additions are recommended to determine initial blend proportions, grinding efficiency, pack set index, mortar flow, compressive strengths of cements and to enable GCP Applied Technologies to formulate the most effective OPTEVA™ TDA® product for each condition.
One of the key benefits of OPTEVA™ TDA® additives is their ability to increase both grinding efficiency and cement strengths to a degree unequaled by conventional grinding aids.
OPTEVA™ TDA® additives are sprayed into the mill’s first compartment or added onto the clinker conveyor belt. Suitable dispensing pumps with adjustable flow rates should be used for accurate dosing and for optimum performance of OPTEVA™ TDA® .
Excellent results are usually obtained with OPTEVA™ TDA® addition rates of 0.10% to 0.30% by weight of cement. Lower rates of addition also have produced satisfactory results when cement formulations have been particularly responsive to the additive.
The optimum addition rate of OPTEVA™ TDA® should be determined in cement mill tests.
OPTEVA™ TDA® additives should be accurately proportioned through a calibrated dosing system, suitable for the cement mill and output required.
OPTEVA™ TDA® is approved for use under ASTM C 465 specification as a non-harmful, processing addition for cements.
OPTEVA™ TDA® is supplied in 210L drums. OPTEVA™ TDA® may also be supplied in bulk in certain locations. It contains no flammable materials.
Protect from freezing. Once frozen, the product should be thawed out slowly and re-mixed thoroughly prior to use. Shelf life is minimum 12 months in manufacturer’s containers.
Field Engineers from GCP Applied Technologies are available to assist in laboratory and mill test evaluations of OPTEVA™ TDA® . Complete testing equipment and methods for analysing mill performance are also available during plant trials.
| Types of Cements Treated with TDA | OPTEVA™ TDA® Product Used | OPTEVA™ TDA® Dosage Range (%) | Grinding Efficiency Increase (%) | Pack Set Decrease (%) | Motar Flow Increase (%) | Strength Development | |
| Early | Longterm | ||||||
| Increase % | |||||||
| Rapid Hardening Ordinary Portland |
OPTEVA™ TDA® OPTEVA™ TDA® N |
0.20-0.30 0.15-0.25 |
5% to 15% | 20% to 40% | 10% to 25% | 5% to 10% | 10% to 250% |
| Ordinary Portland Portland & Pozzolan Portland & Slag |
OPTEVA™ TDA® 730 OPTEVA™ TDA® 735 OPTEVA™ TDA® 770 |
0.15-0.25 0.15-0.25 0.15-0.25 |
10% to 20% | 20% to 60% | 10% to 30% | 5% to 15% | 10% to 30% |
| Portland & Pozzolan or Other Fillers i.e. Fly Ash or Limestone |
OPTEVA™ TDA® 730 OPTEVA™ TDA® 735 OPTEVA™ TDA® 770 |
0.10-0.25 0.15-0.25 0.10-0.25 |
5% to 15% | 10% to 20% | 0% to 5% | 10% to 30% | 0% to 5% |
| Additive | Blank | OPTEVA™ TDA® 735 | OPTEVA™ TDA® 735 |
| Cement Composition: Clinker Gypsum Slag Limestone OPTEVA™ TDA® Dosage |
95% 5% - - - |
95% 5% - - 0.2% |
85% 5% 10% - 0.2% |
| Mill Revolutions Mill Production (t / h) Power Input (kWh / t) Blaine (cm2 / g) Residues 40μm |
3500 - - 3950 0.85% |
3310 - - 3980 0.78% |
3350 - - 3960 0.46% |
| Flow (mm) | 100 | 100 | 100 |
| Compressive Strength (MPa): Power Input (kWh / t) 1 Day 3 Days 7 Days 28 Days |
15.3 35.0 - 57.8 |
20.1 39.2 - 62.1 |
14 36 - 58 |
| Additive | Blank | OPTEVA™ TDA® 770 | OPTEVA™ TDA® 770 |
| Cement Composition: Clinker Gypsum Slag Limestone OPTEVA™ TDA® Dosage |
68% 5% - 27% - |
68% 5% - 27% 0.2% |
63% 5% - 32% 0.2% |
| Mill Revolutions Mill Production (t / h) Power Input (kWh / t) Blaine (cm2 / g) Residues 40μm |
- 45.0 35.0 4930 - |
- 49.0 31.5 4870 - |
- 50.5 30.9 5190 - |
| Flow (mm) | 93 | 107 | 105 |
| Compressive Strength (MPa): Power Input (kWh / t) 1 Day 3 Days 7 Days 28 Days |
7.0 15.1 19.8 25.5 |
11.5 20.3 25.1 31.8 |
6.8 15.6 20.4 26.1 |
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
OPTEVA TDA is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2016 GCP Applied Technologies, Inc. All rights reserved.
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Vietnam Company Ltd, Lot B14, Section B, Street No. 12, Xuan Thoi Son Small Scale Arts & Crafts Group, National Road 22Xuan Thoi Son Village, Hoc Mon District, Ho Chi Minh City
This document is only current as of the last updated date stated below and is valid only for use in Vietnam. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.vn. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2022-01-28
https://gcpat.vn/en-gb/solutions/products/opteva-quality-improvers/opteva-tda