Caulk-applied, one-component, hydro-swelling mastic for sealing smooth and rough construction joints and pipe penetrations
Swellseal® Mastic is a one-component, polyurethane-based, solvent free, hydroswelling mastic, supplied in cartridges and aluminium sausages, for the sealing of construction joints and around pipe penetrations. Swellseal Mastic cures and swells in the presence of moisture. Curing time depends on temperature and humidity conditions, i.e. curing time will reduce if RH and Celsius degrees are higher. Swellseal Mastic will become firm in 24-36 hours. Performance is not affected by the curing time.
- Solvent free.
- Swellseal® Mastic can be applied to concrete, PVC, HDPE, steel, etc.
- The excellent filling and adhesion properties of the product provide a first line filling of cracks and voids, even on lightly humid, smooth or rough surfaces.
- In contact with water Swellseal Mastic will expand to about 350% of it’s original volume.
- Flexible system, which adapts to the irregular surface of the substrate.
- Easy application with standard caulking gun.
- Durable: will exceed the construction’s life.
- Has a good all-round chemical resistance(*) and can resist petroleum, mineral and vegetable oils and greases.
- Swellseal Mastic is approved for contact with potable water.
(*) For chemical resistance please contact your local GCP representative
Field of Application
Swellseal Mastic is used for:
- Sealing rough and smooth construction joints of in-situ cast concrete.
- Sealing joints between pre-cast segments (e.g. manholes, box culverts, cable ducts and pipes).
- Sealing around steel H-beams.
- Sealing between rough surfaces (e.g. slurry walls) and concrete slabs.
- Bonding strip sealants to rough surfaces.
- Sealing around bolt spacers and void formers.
- On secant pile walls.
Pasty during application and rubbery after curing. Colour: white.
The consumption of Swellseal Mastic per linear metre depends on the quality of the surface of the concrete.
|NOZZLE DIAMETER||LENGTH (CARTRIDGE)||LENGTH (SAUSAGE)|
|3mm||20 - 25m||40 - 50m|
|6mm||8 - 10m||16 - 20m|
|8mm||4 - 5m||8 - 10m|
|10mm||Approx. 3m||Approx. 6m|
Technical Data / Properties
|Consistency||Gel / Paste||Test DNC|
|Density (at 20ºC)||Approx. 1.45kg / dm3||DIN 53504|
|Slump in Vertical Application||< 5mm (average 3mm)||Boeing test|
|Hand Dry (at 20ºC and 60% rel. humidity)||12h||Test DNC|
|Flash Point||> 130ºC||Pensky-Martens method|
Cured (7 days at 25ºC, 10mm thick)
|Elongation at Break||Approx. 625%||DIN 53504|
|Tensile Strength||Approx. 625%Approx. 2.2N / mm2||DIN 53504|
|Resistance to Hydrostatic Pressure||Up to 150 metres of water column||Test DNC|
|Swelling Capacity in Contact with Water||Swells to approx. 350% of its original dry volume||Test report KUL University|
Swellseal Mastic is preferably applied onto a dust-free concrete surface. The surface can be rough or smooth, moist or dry.
Installation during heavy rain or in prolonged contact with water results in a premature swelling of the strip, which should be avoided.
Preferably the mastic should cure for 24 hours before pouring concrete.
Despite the fact that Swellseal Mastic has a very good adherence to the concrete, care must be taken, as with all products of this type, not to pour the concrete directly on the product to avoid damaging of the applied sealant.
2. Application Method
For 310cc Cartridges
Break the moisture-proofing aluminium foil on the top of the cartridge and remove the seamer from the bottom. Cut the nozzles diagonally at the appropriate position. Place the cartridge into caulking gun.
For 600cc Sausages
Put the sausage in the empty tube of the caulking gun and cut 1cm off the top of the sausage. Close the tube and install the nozzle. Cut the nozzle diagonally at the apropriate position.
Swellseal Mastic is applied with a caulking gun in an uninterrupted band (minimum 10mm wide and high), in the middle of the joint or prefab element. Concrete cover should be at least 7cm on both sides, in order to avoid cracks from the expansion pressure of swelling Swellseal Mastic.
Appearance Pasty during application and rubbery after curing. Colour: white.
|310ML CARTRIDGES||600ML SAUSAGES|
|12 per cardboard box||12 per cardboard box|
|1 pallet = 75 cardboard boxes||1 pallet = 40 cardboard boxes|
|Weight per cartridge
||Weight per sausage
Minimum 12 months in a dry place at temperatures between 5°C and 30°C.
See shelf life information on the packaging.
To be ordered separately
- Skeleton caulking gun for cartridges 310mL.
- Caulking gun for sausages 600mL closed tube.
- Nozzle for caulking gun 600mm closed tube.
Health & Safety
For full information consult the relevant Material Safety Data Sheet.
gcpat.vn | For technical information: email@example.com
Australia 1800 855 525 email: firstname.lastname@example.org New Zealand +64 9 448 1146 China Mainland +86 21 3158 2888
Hong Kong +852 2675 7898 India +91 124 488 5900 Indonesia +62 21 893 4260 Japan +81 3 5226 0231 Korea +82 32 820 0800 Malaysia +60 3 9074 6133 Philippines +63 49 549 7373 Singapore +65 6265 3033 Thailand +66 2 709 4470 Vietnam +84 8 3710 6168
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
Swellseal is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2016 GCP Applied Technologies, Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140, USA
Printed in Singapore | 07/16 | 300-Swellseal-40
This document is only current as of the last updated date stated below and is valid only for use in Vietnam. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.vn. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2021-02-05